SunLink Corporation today released Precision RMS, the latest addition to the
company's trusted solar roof mount product line. With design innovations that
enable installation on rooftops with limited deck capacity and advanced features
that allow for faster installation, Precision RMS is ideal for a broad range of
"Anyone who has taken a look out the window of an airplane can tell you how
many commercial rooftops are out there, coast-to-coast, perfect for a solar
installation," says SunLink CEO, Christopher Tilley. "The problem is, most
commercial warehouse roofs aren't built to accommodate the extra load of a solar
system. Precision RMS is designed to make it possible for more building owners
to install solar, even in locations where it wasn't previously possible." To
that end, Precision RMS is equipped with feet that can be adjusted to align
loads with structural elements of the roof.
In addition to structure following capability, Precision RMS also has a roof
following capacity of 7°/12 percent, enabling building owners to install solar
arrays on roofs with uneven surfaces. Plus, with a linked rail structure and
stiff aluminum frame, Precision RMS can withstand conditions in the highest
wind, seismic and corrosion zones — opening up a wider range of environmental
sites to solar, as well.
Precision RMS also fast-tracks installation and improves total system quality
in several ways:
- SunLink delivers components preassembled to the project site.
- As the substructure is being installed, modules can be simultaneously
prepanelized (potentially off-roof or off-site) into assemblies of 2, 3 or 4 to
speed up module installation by 50 percent.
- Precision RMS' integrated wire management trays and clips save an average of
40 percent in on-roof time compared with other wire management
For building owners, Precision RMS offers all of the roof-friendly and
operations and maintenance features for which SunLink is best known. System feet
are made from recycled rubber tires, which won't damage the roof surface and may
even eliminate the need for slip sheets. The system also features Tilt Access™
to facilitate roof maintenance and an open design for unimpeded roof drainage
Precision RMS will be unveiled on July 10 at Intersolar North America in San
Francisco, CA. Visit SunLink's booth (#9123) for a hands-on introduction
to the system. Or, join SunLink on June 26 at 11 a.m. PDT/2 p.m. EDT for a free
webinar featuring a sneak peak of the Precision RMS system and a virtual product
demo of SunLink's Core RMS. Register atwww.sunlink.com/training.
Guided by an enduring commitment to R&D,
SunLink is advancing universal solar power adoption by continuing to innovate
highly engineered balance of system products that make solar easier, safer, more
reliable and less expensive to install. Our industry-leading roof and ground
mount systems, combiner boxes, and wire management tools have been proven on
more than 250 MW of commercial projects at 1,200+ sites across North America.
For more information, visit www.sunlink.com.
Source: PR Newswire (http://s.tt/1eb2O)