Dec 31 2009
Solartrope provides solar pool heating systems and solar water heating systems. The surface of the Hi-Temp solar collector supplied by the company is made of synthetic rubber materials. These assembled solar collectors are available in a width of 2ft or 4ft and lengths of 15ft, 20ft, 25ft, 30ft, 35ft and 40ft. The injection headers have an inside diameter of 2in. There is also a hip roof header that is supplied for custom applications.
The Hi-Temp solar collector includes a solar sensor, 3-way valve, isolation check valve, isolation ball valve, water sensor, controller, heater by-pass ball valve, auxiliary heater, filter, pump, adhesives, check valve and vacuum relief valve manual. This solar pool collector provided by Solartrope can be paved to the mounting surface. It operates efficiently on flat roofs. Customers can purchase Hi-Temp headers and solar collector surfaces separately to assemble them and build a solar collector in a length of 100ft. For large commercial pools, this solar collector can be fixed on the roof or ground.
For designing a Hi-Temp solar system, customers must create a total solar collector area, which is equal to the half of the pool surface area. Using more collector area will keep the swimming pool warmer. Users can make a solar system using Hi-Temp assembled collectors in a width of 4ft and different lengths ranging from 15ft to 40ft and areas from 60sq.ft to 160sq.ft. There are manual and automatic control systems available in these solar systems. Solar collectors are also available in custom sizes from Hi-Temp.
Source: http://www.solartrope.com