AC 752 Turbo Wind Generator Station from AeroCraft

AeroCraft provides the AC 752 turbo wind generator station. This wind generator incorporates a direct drive motor for continued good performance and noiseless running.

The 16 poles permanent magnet generator utilized in this model has a self-contained casing and the generator shaft is made using stainless steel. The front shaft of this wind generator is safeguarded by a watertight seal.

The AC 752 turbo wind generator station provided by AeroCraft has three blades made of fiber reinforced plastic. The diameter of the rotor blades measure 240 cm and provide a sweep area of 4.50 m². The cut-in wind speed of this wind generator is 3 m/s and the maximum bearable wind speed is 40 m/s. The safety system included in the wind generator automatically turns the rotor slowly away from the wind direction by utilizing a hinge connecting the generator and the wind vane when the wind speed reaches 15-25 m/s. This turbo wind generator is designed offer 600 rpm. This wind turbine incorporates a slip ring type of power transmission and has an eclipse control to protect against storm.

The AC 752 turbo wind generator is designed for both coastal and inland usage. This wind generator incorporates less number of moving parts for increased stability and easy servicing. This wind generator produces a three-phase current to enable cover longer distances with minimum loss.

Source: http://www.aerocraft.de