Jan 27 2010
Infinigi supplies wind turbines manufactured by Southwest Windpower. The Whisper 100M marine wind turbine consists of three blades made of injection-molded fiber. The CE complaint wind turbine has a cast aluminum housing and comprises permanent magnet alternator. The rotor of the wind turbine has an overall size of 2.1 meters. The Whisper 100M wind turbine has a start-up wind speed of 3.4 meters per second and operates using 12 volt, 24 volt, 36 volt and 48 volt DC units. It has a weight of 21 kilograms and generates a maximum power of 900 watts at a wind speed of 12.5 meters per second.
The wind turbine from Infinigi has a side furling angle governor that functions by protecting the turbine from high winds. The angle governor helps to increase the output of the turbine in any climatic condition. The rotor can, tower inserts and castings of the Whisper 100M marine wind turbine is coated with aerospace coating that further provides additional protection.
The wind turbine from Infinigi consists of a brush card gasket that protects the slip rings from moisture. The shaft and spindle have been coated with nickel coating, while the turbine stator is coated with a naval approved varnish. The Whisper 100M marine wind turbine is supplied with stainless steel hardware. The marine wind turbines are designed for applications used in corrosive wet and salty environment where conventional turbines cannot be used.
Source: http://www.infinigi.com