Jan 30 2010
Stratford manufactures a range of central heating boiler systems such as freestanding and inset boiler stoves. These boiler stoves use wood and solid fuels for burning. The TI40B multifuel inset boiler stove has a built-in cross lateral flow boiler to provide water with consistent temperature. It is made of steel and incorporates an anti-cold water corrosion system to provide trouble-free service.
The TI40B multifuel inset boiler stove has a maximum output of 2kW to heat room and 12.kW and 43,000 BTU to heat water. An average of 8 to 10 radiators is used in the multifuel inset boiler stove for heating purposes. The flue has a diameter of 127mm. This inset boiler stove offered by Stratford is available in a height of 550mm, width of 394mm and depth of 360mm, and has a weight of 105kg. Its clean burning airwash system keeps the glass clean to provide a clear view of the fire.
The primary air diversion system of the TI40B multifuel inset boiler stove maximizes the efficiency of solid and wood fuel. It allows an over draught for wood or a flow of air underneath the solid fuel for efficient burning. The secondary burn system minimizes tar and unburnt gasses from entering into the atmosphere and thus provides efficient burning and less pollution. This inset boiler from Stratford also incorporates a multifuel riddling grate, water sensing thermostatic control and a top or rear flue outlet for smooth operation.
Source: http://www.stratfordboilerstoves.co.uk