Mar 11 2010
Dargreen Power supplies a range of modified sine wave inverters including the PowerBright PB1200 inverter model. This inverter provides continuous power of 200 watts with 400 watts of peak surge. The modified sine wave inverter features a case made of anodized aluminum that offers optimum heat dissipation. The DC to AC power inverter is included with a power on and off switch.
PowerBright PB1200
The PowerBright PB1200 modified sine wave inverter comprises an overload indicator, a 12-volt cigarette lighter plug, integrated cooling fan, and an external 30-ampere spade type fuse that is replaceable. The no load current draw of the inverter is less than 0.3 amperes. This DC to AC inverter has a maximum power efficiency of 90 percent. The modified sine wave inverter also features overload protect and short protect. The inverter needs input voltage of 12 volts DC, with an input DC voltage range of 11 up to 15 volts.
The PowerBright PB1200 modified sine wave inverter can operate in a maximum ambient temperature of 65 degrees Celsius. The DC to AC inverter, offered by Dargreen Power, has an output frequency range of 60Hz. The inverter gives low voltage alarm when the voltage is 10.5 volts and shuts down when the voltage is 10 volts. The cut off level for high voltage is 15.5 volts. The PowerBright PB1200 modified sine inverter measures 5.79 inches in length, 3.89 inches in width and 1.81 inches in height.
Source: http://www.powerbright.com/