Green Light for GreenGo Lidars in Italy for Wind Projects

Italian renewables consultancy Studio Rinnovabili delivers ZX Lidars to wind farm developer for wind resource campaigns in the South of Italy

ZX 300 wind Lidar deployed in mobile trailer to validate 50 metre met mast

GreenGo Srl, a wind farm development company founded in 2018, has confirmed that the Remote Sensing Technology Lidar is supporting their development work for new wind farms in Italy.

In their first project, GreenGo selected ZX 300 and were supported by Italian company Studio Rinnovabili (also known as SR international) to install the autonomous Lidar and power supply next to an existing met mast - limited in providing wind measurements at its maximum height of 42 metres. The collocated Lidar provides wind measurements from ground-level up to more than 200 metres, and validates the measurements being provided by the mast in addition to the wind shear and veer across the potential turbines being considered for the site.

Andrea Bartolazzi, Director at Studio Rinnovabili commented: “Studio Rinnovabili provides measurement services, technical consultancy including combinations of Lidars collocated with traditional met masts or simply standalone Lidar on newer sites. ZX 300 is the market leading Lidar and we are supporting many clients now, such as GreenGo, with our measurement services using this technology.”

Fabio Amico, CTO and Founding Partner at GreenGo Srl commented: “We are now considering wind turbines up to 6 MW onshore in Italy and met masts do not allow us to assess the wind conditions at anywhere near to a useful height. Instead we have worked successfully with Studio Rinnovabili to deploy this excellent ZX 300 wind Lidar that is more mobile, cost-effective and practical for providing vital wind measurements across the full height of the eventual wind turbine.”

GreenGo has been developing greenfield plants in Italy since 2018 and has a 1.5+ GW renewable pipeline, with 10 onshore wind projects to be located in Southern Italy.

ZX Lidars provides vertical and horizontal profiling wind Lidar to accurately measure wind conditions remotely and ahead of their installed position. These accurate, independent wind measurements are a cornerstone in the development, construction and operation of wind farms globally.

Source: https://www.zxlidars.com/

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    ZX Lidars. (2020, July 21). Green Light for GreenGo Lidars in Italy for Wind Projects. AZoCleantech. Retrieved on October 23, 2021 from https://www.azocleantech.com/news.aspx?newsID=27685.

  • MLA

    ZX Lidars. "Green Light for GreenGo Lidars in Italy for Wind Projects". AZoCleantech. 23 October 2021. <https://www.azocleantech.com/news.aspx?newsID=27685>.

  • Chicago

    ZX Lidars. "Green Light for GreenGo Lidars in Italy for Wind Projects". AZoCleantech. https://www.azocleantech.com/news.aspx?newsID=27685. (accessed October 23, 2021).

  • Harvard

    ZX Lidars. 2020. Green Light for GreenGo Lidars in Italy for Wind Projects. AZoCleantech, viewed 23 October 2021, https://www.azocleantech.com/news.aspx?newsID=27685.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit