Kedco provides the solar flat panel collector that is used in solar thermal systems. The solar flat panel collector comes in two sizes, namely, 2.05 and 2.54. The 2.05 solar collector has a capacity of 1.6 liters. The frame of the flat panel collector is made from aluminum that is resistant to sea water. The solar thermal collector incorporates covered collective pipes and mechanical absorbers to provide higher efficiency with lower pressure loss.
The 2.05 solar flat panel collector features a 60mm thermal insulation that helps to minimize the heat loss. The flat panel collector is suitable for on-roof, in-roof, and flat-roof installations. The solar collector has the ability to provide good performance in different weather conditions such as winter, spring, and autumn. The solar collector has a surface of 2.021 square meters. The absorption surface of the solar thermal collector is 1.77 square meters.
The 2.05 solar flat panel collector features NI-AI 0 absorber coating. The deck glass of the solar collector is made of 4mm iron solar glass. The optical efficiency of the collector is 80 percent. The solar flat panel collector has a connection width of 1.05 square meters. The solar collector has a maximum working pressure of 20 bar. The dimensions of the flat panel collector are 2005 x 1008 x 100mm, with a weight of 41kg.