46.6 Watt Solar Charger from Sunsei

Sunsei provides 46.6 Watt Solar Charger for use in recreation vehicles (RV), week-end cabins and boats. This weather resistant model utilizes an in-built blocking diode to prevent quicker power discharges. The 46.6 W Solar Charger is designed to provide 46.6 W power at a maximum current of 3 A. The included 10 A charge controller prevents over charging and saves the batteries.

This plug and play connector model provides hassle-free, reliable connectivity and the included LED indicator provides visible display of panel charging.

The length × width × depth measurement of the power panel used in the 46.6 W Solar Charger offered by Sunsei is 104.8 cm x 35.0 cm x 3.0 cm and weighs 4.3 kg. This model provides a rated current of 1.5 A and 15.5 V. The charge controller utilized in the module measures 57 mm x 70 mm x 28 mm and weighs 0.12 kg. The power characteristics of the charge controller includes a nominal voltage of 12 V, an array voltage maximum of 30 V, a current consumption of 2 mA, minimum operating voltage at battery is 7 V, boost charge voltage for 2 hours is 14.5 V, a floast charge voltage of 13.7 V. The voltage drop and array to battery is estimated as <170 mV and the operating temperature of this model ranges from -40 to 50ºC.

The 46.6 W Solar Charger package includes two numbers of SE 1500 solar panel, a CC 10,000 charge controller, two numbers of panel-to-panel jumper cable, two numbers of extension power cable each measuring 10 ft, two numbers of O-ring connector wire each measuring 1.5 ft, two numbers of male and female DC power port sockets each measuring 1.5 ft, two numbers of battery clamp wire measuring 1.5 ft, four numbers of wire twist connectors, four numbers of center legs and eight numbers of stainless mounting screws.

Source: http://www.sunsei.com/