Jun 8 2010
Harman Stove Company offers the Advance pellet stove. The automatic temperature control system installed in the stove obviates the warm and cold cycles normally linked with the pellet stoves and allow managing the on or off operations as required.
The light colored hopper lid permits easy viewing of pellet availability. The ignition system used in the stove draws air over a heating element kept at the bottom of the burn pot, thus igniting the pellets as they enter the burn pot. The accordion heat exchanger installed in the stove effectively circulates the heat. The patented feeder utilized in this model allows correct feeding of pellet fuel, and the burn pot slowly and fully burns all types of pellets.
Advance Pellet Stove
The exhaust sensing probe installed in the Advance pellet stove automatically adjusts the feed rate of fuel. The temperature control in the stove incorporates a sensor and a microprocessor to read and control the room heating process at a preset temperature level. This stove incorporates a hopper to hold 60 lbs of pellet fuel and offers up to 48,000 Btu/h. The height x width x depth measurements of the Advance pellet stove offered by Harman Stove Company is 32-1/2 in. x 26-5/8 in. x 20-1/2 in. and weighs 250 lbs. The pellet fuel vent size of this stove is 3 in. and its outside air vent size is 2-3/8 in. This pellet stove incorporates a 135 CFM blower for perfect disseminating of heat all over the room.
The optional features offered with this stove include a realistic log set to offer conventional wood fire stove look, gold or bright nickel painting and a direct vent wall pass through kit.
Source: http://www.harmanstoves.com