Jun 8 2010
Harman Stove Company offers the Harman Pellet Pro 38 Plus pellet stove. This compact direct vent pellet stove performs powerfully and offers 7000–38,000 BTU heat in normal mode and 43,000 BTU heat in turbo mode to heat up to 1400 sq.ft area.
This manual ignition stove is thermostatically controlled. Unlike other pellet stoves the Pellet Pro 38 Plus stove incorporates a small sensing probe to send fuel feed information to an installed microprocessor and the information is used to regulate the feeding of the stove and keep the room warm at a desired level. This pellet stove has a hopper to hold 50 lbs of fuel and with an optional extension it can hold up to 110 lbs.
Harman Pellet Pro 38 Plus Pellet Stove
The automatic temperature control installed in the stove allows setting of required stove temperature instead of the room temperature. Also the temperature control allows on/off operations as and when required and does away with the requirement of warm/cold cycles. The underfire feeder system incorporated in the model transfers right quantity of fuel to the burn pot. The burn pot used in the model burns all types of pellets by maintaining a low level burn rate. The accordion heat exchanger utilized in the stove transfers the heat efficiently to a larger sized area. The special ignition system utilized in the model is kept at the bottom of the burning pot. The incoming air in to the heating system is heated to such an extent to ignite the pellet fuel as it enters the burning pot. The 135 cfm blower installed in this pellet stove allows even spreading of hot air all over the room.
The Pellet Pro 38 Plus pellet stove from Harman Stove Company has a height x breadth width x depth dimension of 32 in. x 22 in. x 28-1/2 in. and weighs 215 lbs. The flue size of this stove is 3 in. and its outside air vent size is 2-3/8 in. The optional outside air kit makes the stove to use 100% outside air and allows its installation near door or window openings.
Source: http://www.harmanstoves.com