Jun 21 2010
Dansons offers the Pelpro freestanding pellet stove. This steel fabricated stove comes with an installed thermostat to run on high/low or on/off modes. The stainless steel heat exchanger incorporated in the stove allows improved heat generation.
This stove comes with a hopper capacity of 40 lbs and the available hopper extensions allows increased hopper load up to 100 lbs thus increasing the burn time to 100 h. The Pelpro freestanding pellet stove offered by Dansons delivers a minimum heat out put of 15,000 BTU and a maximum of 42,000 BTU. The BTU output can be adjusted up to 46,200 BTU.
Pelpro Freestanding Pellet Stove
The heat output of the Pelpro freestanding pellet stove can cover an area of 1500 sq.ft during extreme weather conditions and this coverage area can be comfortably increased to 2000 sq.ft under normal weather conditions. The standard electric ignition incorporated in the stove allows quicker starting of the stove and the four heat output settings allows easy setting of the room heat. The optional room thermostat allows controlling of the room temperature comfortably.
The convection of type 265 CFM blower installed in the pellet stove offers five blower speed settings. The installed glass air wash feature keeps the viewing glass of this pellet stove clean. This pellet stove with an efficiency of 78% has an EPA approved emission level of 0.9 g/h. The height x width x depth dimensions of this stove is 28.7 in. x 24.75 in. x 25.12 in. and weighs 225 lbs.
Source: http://www.dansons.com