Jun 14 2010
AXITEC Solar offers Monocrystalline Photovoltaic modules for use in solar electricity plants. The modules are available in AC-180M/125-72S, AC-183M/125-72S, AC-187M/125-72S and AC-190M/125-72S models.
Each solar module with a minimum power tolerance of 0/+2% yields an optimum output even under an average 17% low light conditions. The silver-anodized aluminum frame used in the modules has soft grip edges for comfortable carrying during installation and the proven construction of the frame increases the stability. The cable and the secure connecting systems used in the Monocrystalline Photovoltaic modules offered by AXITEC Solar are strong built and withstand all types of weather conditions.
Monocrystalline PV Module
The IP65 junction box used in the modules is small in size and limits within the size of the frame. The three standard bypass diodes incorporated in the junction box are deliberately kept uncovered for easy replacement. The length x breadth x height dimensions of the AC-190M/125-72S module is 1600 mm x 799 mm x 38 mm and weighs 17.5 kg with frame. The frame is covered using a 4 mm hardened low reflection white glass and the module incorporates 72 number of monocrystalline square cells measuring 125 mm x 125 mm in size.
The 190M/125-72S solar module offers a nominal output of 190 W, a nominal voltage of 36.87 V, a nominal current of 5.17 A, a short circuit of 5.48 A, an open circuit voltage of 44.94 V and a module conversion efficiency of 14.91%. The NOCT of this module is 46º C, and its maximum load carrying capacity is 5400 N/m².
Source: http://www.axitecsolar.com