Feb 19 2010
Harman Stove Company manufactures stoves, fireplace inserts, fireplaces and central heating systems. The Harman PB105 pellet boiler has an automatic temperature control, automatic ignition, burn pot and a pellet pro feeder. The burn pot can be easily accessed. The hopper component can be opened easily for cleaning. The hopper has a capacity of 205lbs and there is a large ash pan for removing ashes.
Harman PB105 Pellet Boiler
The heating capacity of the Harman PB105 pellet boiler ranges from 0 to 113,900 BTU. It has a heating efficiency of 85% and can heat an area of 2,500sq.ft. The flue included with this heating system has a 4-inch pellet vent pipe. This boiler system available from Harman Stove Company incorporates a 3-pass heat exchanger that helps to maintain maximum efficiency of the boiler. The burn pot or the firebox has a swing open access. The front door of this boiler has a window for accessing the burn pot and for viewing the fire.
The PB105 pellet boiler is equipped with an insulated water jacket. It can operate in 120V AC power and has a fuse rating of 6A. The specific clearance area to be maintained at the rear should be 6 inches, front should be 36 inches, left side should be 18 inches and the right side should be 20 inches. The following options are available with the pellet boiler: outside air temperature sensor, water temperature sensor, dual boiler pressure and water temperature gauge, boiler water drain valve and pressure relief valve.
Source: http://www.harmanstoves.com