Vertical Axis Wind Turbines from Franklin Wind Energy Group

Franklin Wind Energy Group manufactures and supplies the vertical axis wind turbines. The blades of the turbines are directly attached to the generator and there is no stress on bearings. Since the turbine blades are fixed on different planes, air flow is spread faster. This wind generator has no drive shaft to twist and torque.

The vertical axis wind turbine has a rated power of 5kW. It begins to operate at a wind speed of 3mph. The cut-in speed and cut-out speed of this wind turbine are 5mph and 325RPM, respectively. The maximum rated speed of the vertical axis wind turbine from Franklin Wind Energy Group is 20mph. This turbine operates on 90 to 150RPM. It is equipped with four turbine blades. The rotor has a height of 12ft and its inside and outside diameters are 6ft and 7.3ft, respectively.

The actual testing voltage of the vertical axis wind turbine is 50 to 270V. The turbine’s available voltage capacity is 24 to 48V. Its actual operating temperature is -40 degrees Celsius to +35 degrees Celsius and the estimated temperature is -50 degrees Celsius to +100 degrees Celsius. This wind generator from Franklin Wind Energy Group has a weight of 557lbs. It is suitable for different applications including residences, office buildings, apartment buildings, cell towers, water towers, stadiums, warehouses, utility poles, airports, farms and ships.

Source: http://franklinwindenergygroup.com