Cleantech News

RSS

Windcell Windbelt Wind Generators from Humdinger Wind Energy

The Windcell flutter technology panels does not use spinning blades and use least number of moving parts. The wind panels can be assembled into vast arrays and easily installed.

29 May 2010

Aeolos-H 50kw Horizon Axis Wind Turbine from Aeolos Wind Turbine

Aeolos Wind Turbine, Aeolos-H 50kw horizon axis wind turbine, horizon axis wind turbine.

29 May 2010

Extreme Wind Windspire Turbine from Windspire Energy

This 1200 W wind turbine is designed to produce an annual output of 2000 kWh. The cut-in wind speed of this turbine is 8.5 mph, its AEP average wind speed is 12.5 mph, and its rated power wind speed is 26.8 mph.

29 May 2010

Pelletplus Sun and Biomass Energy System from Oxford Solar

The power and combustion regulations system incorporated in the Pelletplus energy module adjusts the burner operations automatically and use down-burn technique for better heating and lambda sensor technology to sense the amount of unburnt oxygen in the exhaust.

29 May 2010

HYenergy Wind-Solar Output Hybrid Wind Turbine System from WindMax Green Energy

The brushless generator used in the wind turbine incorporates strong neodymium magnets and does not require regular maintenance. For stopping the wind turbine operations a fully automatic aerodynamic braking and a controller managed electromagnetic braking are used.

29 May 2010

Air Breeze Land Wind Turbine from Innergy Power Corporation

The circuit monitors installed in the wind turbine regularly checks the wind speed and automatically slows down the speed of the blades when the speed crosses optimal output level speed thus stopping the turbine from going into flutter.

29 May 2010

SunKeeper Junction Box Mounted Solar Controller from Morningstar Corporation

This solar controller is designed with quality power electronics to endure high level temperature up to 70ºC at the solar module. This solar controller is totally protected against power vagaries such as short circuit, reverse polarity, reverse current, over current, transient surges and lightening.

29 May 2010

Sunpole Solar Power Supply Module from LP Hoying

The wiring for various parts of the Sunpole module is carried out using conduits incorporated in the structure thus avoiding the problem of exposed wiring. The fastening parts utilized in this module are mounted using antitheft hardware.

29 May 2010

Classic 500 Pellet Stove from Bosca Chile S.A

The Classic 500 pellet stove incorporates a thermostat to control the heating functions of the stove and the installed self ignition allows easy lighting of the stove. The two speed convection blower incorporated in the stove circulates the room air through the heat exchangers to enable easy dissipation of the heat.

29 May 2010

Classic Bay 1200 Pellet Stove from Quadra-Fire

The height x front width x depth measurements of this pellet stove is 31-5/8 inches x 28-1/2 inches x 27-5/8 inches. The viewing area of this pellet stove measures 13-7/8 inches x 11 inches.

28 May 2010

Bella Pellet Stove from Lennox Hearth Products

The combustion fan assembly used in the pellet stove is adequately cushioned for noise free operation. The DC brushless auger motor incorporated in the stove operates noiselessly and reliably allowing quicker start-ups and offers uniform fuel delivery.

28 May 2010

Lopi Leyden Cast Iron Pellet Stove from Travis Industries

This pellet stove burns up to 29 hours without the need for refueling and the burning hours can be increased by using a wall thermostat. The Lopi Leyden heats up to 800 – 2250 sq.ft area with 13940 - 45100 Btu range.

28 May 2010

Low Voltage Circuit Breakers from ABB

The Low Voltage Circuit Breakers can be equipped with thermo magnetic or electronic releases. The thermo magnetic releases are appropriate to guard both alternating and direct current type of networks.

28 May 2010

Spectraflex 32W Solar Power from Marlec

The Spectraflex 32W flexible solar panel is constructed utilizing UV stabilized polymers and adhered or sewed to a flexible cushioned backing material. The amorphous silicone cells utilized in the flexible panel are enclosed in a strong capsule to withstand rough use.

28 May 2010