CECO Environmental announced that it has received nine new contracts totaling $8.4 million. CECO Environmental is a leading provider of industrial ventilation and pollution control systems. Rick Blum, Chief Operating Officer and President, remarked that the orders were received from clients in various industries that include cement, chemical, refining, automotive and power industries. The company has four customers in the United States and its other customers are spread across Australia, Belgium, Korea, Venezuela and Mexico.
Woods Hole Landholdings (WHLH) has announced that it has equipped the headquarters of Woods Hole Group with a solar panel installation. The company has teamed up with Beaumont Solar for the renewable energy project. The installation has utilized solar panels from Sun Power. At present, the solar panels from Sun Power are the most efficient panels available on the global solar market. The office building is headquarters for the Woods Hole Group Inc. and its subsidiary, the Woods Hole Group Middle East. The solar power system has 176 panels and occupies approximately 2,400 square foot of space on the roof.
Vestas has received an order from Nordwind Handels GmbH, a German company, for the supply of 40 V90-2.0 MW wind turbines. The contract involves delivery, installation and commissioning of the wind turbines. A ten-year service agreement and a VestasOnline Business SCADA solution are also part of this contract. The installation process for these V90-2.0 MW wind turbines will begin during the fourth quarter of the year 2010 and the entire project is scheduled for completion by the beginning of the year 2011.
Maryland’s single largest rooftop solar power installation was unveiled by Staples and SunEdison at Staples’ fulfillment center in Hanover. Staples is the largest office products company in the world and SunEdision is a subsidiary of MEMC Electronic Materials and largest provider of solar energy services in North America. The solar installation occupies nearly 175,000 square feet of roof space, which is bigger that three football fields. The rooftop solar installation has a capacity to generate 1.01 megawatt of power.
The basic substrate used for the building of electrical circuits and capturing of sunlight and converting it into electricity is provided by polysilicon, which is considered as the backbone of the photovoltaic business and the semiconductor industry. In comparison with the electronic grade silicon that is used to make semiconductors, the purity of silicon can be much lower for making solar wafers. “Polysilicon for Solar Wafers” a techno-economic report, has been released by SRI Consulting. This report talks about the manufacturing economics and the process design for three major commercial processes.
Solutia has been selected to supply its Therminol VP-1 synthetic heat transfer fluid for a new concentrating solar power plant, Solnova 4, in Sevilla, Spain. The 50-MW solar power plant, which is managed by Abener, is scheduled to commence operations in 2010. This plant will be located in Abener's Solucar Platform complex, where several solar plants will also be installed.
Research and Markets has released a new report titled “Miniature Solar Cells Market Potential.” Usable energy from the light of the sun is obtained with the solar power technology. For a very long time, traditional technologies have been using solar energy. The solar technology is deployed extensively in regions where utility power is not available such as in remote locations. This technology is used for space applications also.
Research and Markets has released “Top 5 European Solar PV Markets to Look For in 2009-2010” report. Europe has currently maintained its position as the world leader in solar PV power generation as it has over two-third of the world’s installed capacity of solar photovoltaic. The position of the European market has been further improved by Germany, which is considered as the leading producer of solar modules and cells and a large market for the deployment of solar PV. Italy, Spain, Portugal and France are the other new markets that are responsible for the improvement of the European market.
The FlowCon A single-line solar pump station is integrated with DeltaSol BS or DeltaSol AX controller. It is equipped with the WILO Star ST15/6 or ST15/7 solar thermal or circulation pump and flowmeter. Along with the pressure gauge and relief valve, this pump station can be assembled safely.
MJD Mechanical designs and installs a range of geothermal heating and cooling systems. There are different types of equipment utilized for geothermal installation including forced air systems, hydronic systems, and combined systems. The forced air systems are available in two models, namely, Boreas and Zephyrus. The Zephyrus forced air heating and cooling system is designed for colder climates. It is made specifically to heat and cool areas that require heating and some cooling also.
Middleton Geothermal Services provides testing services for geothermal project. The two geothermal testing services, offered by the company, are thermal conductivity testing, and High Density Polyethylene (HDPE) pressure testing. The thermal conductivity testing is conducted to measure the ability of a specific site to transfer heat. The thermal conductivity testing is essential in commercial geothermal projects. A commercial geothermal application may require large amount of heat transfer through the ground heat exchanger. The size of the heat exchanger is determined based on its efficiency.
MEG Geothermal is specialized in providing geothermal energy for residential and commercial heating and cooling. The company works with architects, developers, project owners, mechanical engineers, mechanical contractors, homeowners and builders to design and install geothermal systems for their projects. Site evaluation, drilling, ground heat exchanger designing, formation thermal conductivity testing and installation of geothermal system are some of the services offered by the company.
Mannvit Engineering offers geothermal development services for developing a geothermal power plant. The five phases involved in the development of a geothermal development plant are exploration and reconnaissance, pre-feasibility, feasibility, detailed design and construction, and operation and maintenance. The geothermal development service starts with the exploration and reconnaissance phase. This phase is undertaken to identify whether the location has enough geothermal resource that can be exploited commercially. First a desk study is conducted to collect the available data on the field.
The 9000 free-standing fireplace has heating efficiency up to 400%, which is higher than the traditional open-hearth fireplaces. It can be installed together with the chimneys having a diameter of 8 or 10 inches. This fireplace can be installed easily on a ceiling without modifying the existing structure. It has a customized hood height.
The Clearview 650 woodburning stove is constructed with steel and is soldered inside and outside to provide long service life. It is equipped with a removable ash pan made of stainless steel. There are door catch and adjustable hinges to keep the air tight. This wood stove also includes adjustable leveling bolts and a removable door handle made of solid brass.
News Categories
Terms
While we only use edited and approved content for Azthena
answers, it may on occasions provide incorrect responses.
Please confirm any data provided with the related suppliers or
authors. We do not provide medical advice, if you search for
medical information you must always consult a medical
professional before acting on any information provided.
Your questions, but not your email details will be shared with
OpenAI and retained for 30 days in accordance with their
privacy principles.
Please do not ask questions that use sensitive or confidential
information.
Read the full Terms & Conditions.